Dakota Durango Forum banner

03-04 front brake upgrade

16456 Views 32 Replies 18 Participants Last post by  9t9-5.2
I'm planning on doing a brake upgrade on my 01 R/T and have a few questions. I've tried searching on here and couldn't find my answers, but it may be also that I'm very tired.. Anyways my questions:

1. Parts, r these all the parts I need or am I missing something?
a. 03-04 Spindles
b. 03-04 calipers w/ brackets
c. rotors, pads
d. 03-04 brake lines (plan on using goodridge SS lines)

2. Will any caliper from an 03-04 Dakota work? Like would a caliper from a 6 cyl 4x4 work on my 8 cyl 4x2? Same goes for Spindles

3. I've read on another site someone saying 03-04 Dakotas have a different master cylinder than say my 01. Is this true?

4. I looked and looked and couldn't find a write-up/ how to on installing this. Does anyone know where I can find one?

5. Thank you for the help!
1 - 2 of 33 Posts
If its the same calipers and rotors then why would you upgrade? Just wondering cause with all that I have in the motor its about time to upgrade the brakes and I would just leave the drums out back if I could put a cheap upgrade on the front...
Oh really... bolt on, mild fab, or all out pain in the ass??? I am in the process of searching for more info on the conversion but if you have a link that would be great! Oh and will my 17" rt's work with this?
1 - 2 of 33 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top