02 3.9 to 5.2 swap pcm and wiring

2666 Views 3 Replies 4 Participants Last post by daddyododge, Mar 28, 2019

Bullittwp

Discussion Starter · Mar 24, 2019

I've read all the threads and I've done my research and see know this topic always comes up, but what am I supposed to do if I can't find the pcm I need. I've searched and looked..I've all Solopcm and even dodge and nobody has a pcm for a 02 rt Dakota.
I've even went as far as to strip a Durango but it is a 98 and things are different. I really don't know what to do right now. I need to get the truck going. All I have really need is to wire the 2 injectors in and get the pcm and a sct but I'm having no luck on a pcm. Does anyone have any suggestions or is there any way I can get the Durango parts to work

Save

1 - 1 of 4 Posts

RXT

· #2 · Mar 24, 2019

I'm not an electrical guru…I actually hate that the electronics have become part of an engine swap…but it is, what it is.

Ok, whats obvious to me, you will not have luck finding a PCM for a 02 R/T Dakota with a 5.2 because the 5.2 was never available on the 02. That means that you're going to need the PCM for whatever model year the engine happens to be…then of course the rest of the truck might not be compatible…at least those things the PCM controls (which really shouldn't be much)

Sorry I'm not much help. As I said, I'm not fond of dealing with the electrical side of an engine swap.

Ed

Save

1 - 1 of 4 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month