basically the way way Dave calculated it is gonna be your best bet. According to my 1/8 mile time and trap, I'm at 5.3 seconds, which in my book is way more accurate than the stop watch method I did on it back before I found that website. With the stop watch method I was getting 4.6 - 4.7 seconds. I know that a 4100lbs brick with shitty stock heads and stock 3.92 gears didn't go 0-60 in 4.6 seconds. 5.3 seconds sounds a whole lot more accurate to me than 4.6s does with my current engine setup. just my .02 
nethumb:
nethumb:
