Dakota Durango Forum - View Profile: Primus
 

Primus Primus is offline

I hate you people.

  Visitor Messages

Showing Visitor Messages 1 to 4 of 4
  1. Jared Johnson
    10-17-2016 02:18 AM
    Jared Johnson
    I figured out there was not enough power to engage the solenoids. used a jumper wire to trans relay. it shifts gears but still no speedo or odometer. bad PCM?
  2. Jared Johnson
    10-08-2016 09:58 PM
    Jared Johnson
    hey. I had the truck checked out. guy hooked it up to a computer for free. so he said it was the 3-4 solenoid. if it really is electrical. how would I check to see if its working or not? I know nothing about checking voltages. Thanks
  3. Primus
    07-28-2013 03:09 PM
    Primus
    I really don't know if you can use the MDS HEMI's in a non-MDS HEMI vehicle. Chrysler's cylinder deactivation system(MDS) uses oil pressure to pump up the lifters that deactivate the cylinders when there is a load on engine. Whenever there is light load on the engine, the computer activates a solenoid that turns off the oil flow to the lifters and the MDS lifters have a spring in them that allows the valves to the deactivated cylinder to stay closed. That is why I do not feel that using a MDS HEMI in a non-MDS HEMI is worthwhile. I would suggest you do a little more shopping, both locally and online to see who has non-MDS HEMI's for a decent price. $2500 is too high if it is a junkyard or private seller. That price is decent if it is a remanufactured engine with at least a one year warranty.
  4. lmarcucci7
    07-28-2013 08:42 AM
    lmarcucci7
    Hi good sir and fellow dodger,

    You seem to be answering all the MDS to Non-MDS questions. So, I'm going to skip the waiting and just ask you directly. I've got a 2004 durango with a blown hemi motor. There's a guy down the street that has a 2007 Ram 1500 MDS motor. He's selling it for $950 and all the other non-MDS hemis are going for over 2500. So, can I swap the motor into my durango by just swapping intake manis and all other remaining senors? Are there any goofy vacuum lines that will be different? And, is it really necessary to swap the heads, too? or can I leave the MDS cams, lifters, etc on there?

    Thanks in advance. I appreciate it immensely.

  About Me

  • About Primus
    Location
    Overland Park, Kansas
    Vehicle
    2003 Dodge Dakota
  • Signature
    Something stinks and it ain't me.
    327K+ miles, mostly all original factory parts, and 15 yrs. of reliable service.....you are missed.

  Statistics

Total Posts
Visitor Messages
General Information
  • Last Activity: Yesterday 02:16 AM
  • Join Date: 04-30-2009

  Mentions

08-02-2019
02:42 PM - WestCoastKevin mentioned Primus in post 08 block in an 01
Like Primus said, you have to sp...

  Thread Tags

No results to display...

  Quotes

09-06-2019
01:56 PM - radioactive quoted Primus in post Lightning strikes & Dakota won't start...
Yeah, I didn't consider tha...
03:59 AM - RXT quoted Primus in post Lightning strikes & Dakota won't start...
Yeah, I didn't consider tha...
02:26 AM - Primus quoted RXT in post Lightning strikes & Dakota won't start...
Just as an FYI (and not ...
02:26 AM - Primus quoted radioactive in post Lightning strikes & Dakota won't start...
Just as an FYI (and not to start...
02:23 AM - Primus quoted Bjoe in post Lightning strikes & Dakota won't start...
Unless your experienced i...
09-05-2019
05:19 PM - radioactive quoted Primus in post Lightning strikes & Dakota won't start...
If you don't have the 24V D...
09-04-2019
05:23 PM - chevjerico quoted Primus in post What's going on with 4.7 head gaskets?
There is nothing wrong with...
11:16 AM - RXT quoted Primus in post Lightning strikes & Dakota won't start...
It is really hard for light...
08-16-2019
02:35 AM - Primus quoted RXT in post 4.9 to 5.8 swap
5.8?? Ed I didn't know...
08-09-2019
02:07 AM - Primus quoted DoDak in post Front Prop shaft
My new U-joint converted f...
07-11-2019
01:59 AM - Primus quoted A1eft78 in post 09 out 04 in
sorry should have been can ...
07-08-2019
01:40 PM - Warren quoted Primus in post Ram midsize truck spied
https://www.motortrend.com/...
11-17-2017
12:31 AM - Primus quoted RXT in post New Ford Rangers spotted in KC area
As far as I know, Ford h...
10-22-2017
05:18 PM - RalphP quoted Primus in post Replaceable prom chip on 1992 Dakota
... and the PCM's are potte...
04-08-2017
11:38 AM - Rango 5.7 quoted Primus in post 05 Durango 2wd 5.7 hemi towing capacity
The max towing capacity for...
03-12-2017
07:36 PM - VaiFanatic quoted Primus in post 2-Piece Lens Question
Check your grounds and the ...
02-14-2017
09:15 PM - smerch69 quoted Primus in post Second Gen parts truck
Not much will work on older...
02-08-2017
12:24 AM - Primus quoted DakotaJP in post 4 codes with engine light
I think the downstream 02 sen...
01-31-2017
11:59 PM - SHiVMan R/T quoted Primus in post HELP!!! Ticking noise after replacing Timing chain 5.9L Magnum
There is no chain tensioner...
12-28-2016
03:31 AM - cferraris quoted Primus in post First Gen Durango Stereo
The fact the USB port faile...

  iTrader Score

iTrader Profile Recent Ratings
iTrader Score:
Positive Feedback:
0
0%
Members who left positive:
Members who left negative:
0
0
Total positive feedback: 0
Submit Feedback
  Past
Month
Past
6 Months
Past
12 Months
Positive Positive 0 0 0
Neutral Neutral 0 0 0
Negative Negative 0 0 0
 
For the best viewing experience please update your browser to Google Chrome