PRODUCT:  HOODS
CLICK HERE FOR FORUM DISCUSSION : EXTERIOR COSMETICS

PRODUCT LISTINGS

Disclaimer

86-90 DAKOTA
AAR QUALITY FIBERGLASS
US BODY SOURCE
UNLIMITED PRODUCTS

91-96 DAKOTA
AAR QUALITY FIBERGLASS
US BODY SOURCE
KEYSTONE RESTYLING

97-04 DAKOTA OR 98-03 DURANGO
APC
AAR QUALITY FIBERGLASS
BROWN DESIGN STUDIO
US BODY SOURCE
CERVINI'S
EAST COAST CUSTOMS
ELITE CUSTOMS
EREBUNI CORP.
FIBER CONCEPTS
MOORE PERFORMANCE PRODUCTS
KEYSTONE RESTYLING
PROFINISH-PROGLASS
REFLEXXION
STINGER FIBERGLASS
SUNCOAST CREATIONS

05+ DAKOTA
US BODY SOURCE
KEYSTONE RESTYLING
RK SPORT

04+ DURANGO
US BODY SOURCE
KEYSTONE RESTYLING

The information contained within this website has been gathered from the internet as an archive for Dodge Dakota and Durango owners, and is for informational purposes only.   The owners of this website are not directly affiliated with any of these companies, and do not guarantee or warranty any of the products listed on this page.  The opinions expressed on this page are respective of their individual sources, and are not meant to be represented as unarguable fact.  Research your purchases carefully and contact the companies listed on this page if you have any questions or comments.  This website is not responsible for any parts that are not compatible, don't work, or damage your vehicle.  However, if you do find any information on this site that is ambiguous or incorrect please contact the website staff immediately.

THANK YOU to everyone who has contributed information to this list!

NOTE:  PRODUCTS ARE LISTED IN ALPHABETICAL ORDER OF MANUFACTURER WEBSITE URL

DO YOU KNOW A PRODUCT THAT IS NOT LISTED ON THIS SITE?
SUBMIT THE INFO TO WEBMASTER@DAKOTA-DURANGO.COM


1986-1990 DAKOTA HOODS


AAR QUALITY FIBERGLASS
http://www.aarqualityfiberglass.com

3175 Grissom Parkway
Cocoa, FL 32926
(321) 638-0961
sales@aarqualityfiberglass.com

PRODUCT INFORMATION:
Fiberglass hood for 1986-1990 Dakotas.

PRODUCT PICTURES:

  Have a photo of one of these products installed in a Dakota or Durango?  Send it in!

MODEL AVAILABILITY / PART NUMBERS:
Part #1007BOH - 1986-1990 Dakota R/T Hood

INSTALLATION INSTRUCTIONS:
You should have a body shop install this product.  Some sanding, prepping, painting, then mounting will be required.  Expect to pay anywhere from $250-400 for these services.
 


US BODY SOURCE
http://www.carhoods.com

9009 South East County Road 325
Hampton, FL 32044
customerservice@carhoods.com

PRODUCT INFORMATION:
Insulated air space between layers, Cormat reinforced surface, with smooth gelcoating inside and out.  High-Tech design inner liner fully supports the outer skin, providing a show worthy inner structure which is smooth, rigid, and ready for prep & paint. The Cormat reinforced surface is both strong and straight. Steel anchors allow for use with both OEM hinge & latch. Side  90 edges are left long, scoops & baffles come closed & require opening to make the hood functional. Lighter tension springs may be required.

PRODUCT PICTURES:

  Have a photo of one of these products installed in a Dakota or Durango?  Send it in!

MODEL AVAILABILITY / PART NUMBERS:
Part #TDKH-87 - 1986-1990 Dodge Dakota Cowl Hood

INSTALLATION INSTRUCTIONS:
You should have a body shop install this product.  Some sanding, prepping, painting, then mounting will be required.  Expect to pay anywhere from $250-400 for these services.
 


UNLIMITED PRODUCTS
http://www.up22.com

8770 Caliente Rd.
Hesperia, CA 92345
(877) 735-7772
(760) 948-0055
net55@aol.com

PRODUCT INFORMATION:
Fiberglass Cowl Hoods available from 2.5" to 9" in cowl height for 1986-1990 Dodge Dakotas.

PRODUCT PICTURES:

  Have a photo of one of these products installed in a Dakota or Durango?  Send it in!

MODEL AVAILABILITY / PART NUMBERS:
1986-1990 Dodge Dakota, Varying Cowl Heights from 2.5" to 9"

INSTALLATION INSTRUCTIONS:
You should have a body shop install this product.  Some sanding, prepping, painting, then mounting will be required.  Expect to pay anywhere from $250-400 for these services.
 


1991-1996 DAKOTA HOODS


AAR QUALITY FIBERGLASS
http://www.aarqualityfiberglass.com

3175 Grissom Parkway
Cocoa, FL 32926
(321) 638-0961
sales@aarqualityfiberglass.com

PRODUCT INFORMATION:
Fiberglass hoods for 1991-1996 Dodge Dakotas.

PRODUCT PICTURES:

  Have a photo of one of these products installed in a Dakota or Durango?  Send it in!

MODEL AVAILABILITY / PART NUMBERS:
Part #1010BOH - 1991-1996 Dakota Cowl Hood
Part #1016BOH - 1991-1996 Dakota R/T Hood

INSTALLATION INSTRUCTIONS:
You should have a body shop install this product.  Some sanding, prepping, painting, then mounting will be required.  Expect to pay anywhere from $250-400 for these services.
 


US BODY SOURCE
http://www.carhoods.com

9009 South East County Road 325
Hampton, FL 32044
customerservice@carhoods.com

PRODUCT INFORMATION:
Insulated air space between layers, Cormat reinforced surface, with smooth gelcoating inside and out.  High-Tech design inner liner fully supports the outer skin, providing a show worthy inner structure which is smooth, rigid, and ready for prep & paint. The Cormat reinforced surface is both strong and straight. Steel anchors allow for use with both OEM hinge & latch. Side  90 edges are left long, scoops & baffles come closed & require opening to make the hood functional. Lighter tension springs may be required.

PRODUCT PICTURES:

COWL HOOD:

  Have a photo of one of these products installed in a Dakota or Durango?  Send it in!

MODEL AVAILABILITY / PART NUMBERS:
Part #TDKH-91 - 1991-1996 Dakota Cowl Hood
Part #TDKH-91MR - 1991-1996 Dakota 6-Pack Hood
Part #TDKH-91DS - 1991-1996 Dakota Shaker Hood

INSTALLATION INSTRUCTIONS:
You should have a body shop install this product.  Some sanding, prepping, painting, then mounting will be required.  Expect to pay anywhere from $250-400 for these services.
 


KEYSTONE RESTYLING
http://www.keystonerestyling.com

6821 West Central Ave.
Toledo, Ohio 43617
(888) 575-3453
(419) 539.7120
sales@keystonerestyling.com

PRODUCT INFORMATION:
Fiberglass Ram Air Hoods.

PRODUCT PICTURES:

 

  Have a photo of one of these products installed in a Dakota or Durango?  Send it in!

MODEL AVAILABILITY / PART NUMBERS:
Part #GHD-200 - Twin-Duct Hood for 91-96 Dakota

INSTALLATION INSTRUCTIONS:

You should have a body shop install this product.  Some sanding, prepping, painting, then mounting will be required.  Expect to pay anywhere from $250-400 for these services.
 


97-04 DAKOTA + 98-03 DURANGO HOODS


AMERICAN PRODUCTS COMPANY (APC)
http://www.4apc.net

22324 Temescal Canyon Rd.
Corona, California 92883
(800) 594-4272
(909) 898-9840
sales@4apc.net

PRODUCT INFORMATION:
Looking for a show winning hood for your car? This high quality APC hood is designed to give your vehicle cutting edge look with a real carbon fiber finish. Each hood is constructed from a carbon fiber top layer with a fiberglass undercarriage. Heavy duty factory style latches included for ease of installation. This hood features a high gloss gel-coat so you do not have to paint it.

PRODUCT PICTURES:

  Have a photo of one of these products installed in a Dakota or Durango?  Send it in!

MODEL AVAILABILITY / PART NUMBERS:
1997-2004 Dodge Dakota - Part #101066ND
1998-2003 Dodge Durango - Part #101066ND

INSTALLATION INSTRUCTIONS:
You should have a body shop install this product.  Some sanding, prepping, painting, then mounting will be required.  Expect to pay anywhere from $250-400 for these services.
 


AAR QUALITY FIBERGLASS
http://www.aarqualityfiberglass.com

3175 Grissom Parkway
Cocoa, FL 32926
(321) 638-0961
sales@aarqualityfiberglass.com

PRODUCT INFORMATION:
AAR Quality Fiberglass offers two hoods for Dodge Dakota/Durangos.  The most popular by far is the 'Cuda hood.  Some sample pictures are visible below.

PRODUCT PICTURES:

97-04 CUDA HOOD:

 

 

 

 

 

97-04 COWL HOOD:
 

97-04 COWL HOOD:
 

97-04 COWL HOOD:
 

  Have a photo of one of these products installed in a Dakota or Durango?  Send it in!

MODEL AVAILABILITY / PART NUMBERS:
Part #1017BOH - 1997-2004 Dakota and 1998-2003 Durango Cuda Hood
Part #1018BOH - 1997-2004 Dakota and 1998-2003 Durango Cowl Hood

INSTALLATION INSTRUCTIONS:
You should have a body shop install this product.  Some sanding, prepping, painting, then mounting will be required.  Expect to pay anywhere from $250-400 for these services.
 


BROWN DESIGN STUDIO
1300 North Tahoe
Wichita, KS 67203
(316) 945-0206
browndesign@prodigy.net

PRODUCT INFORMATION:
Brown Design Studio is new to the Kit market, but not new to custom composite design and fabrication. Building race car body parts for Formula Atlantic's and others lead us to start designing a few custom body kits. Our parts are all hand laid with the best, light weight and strongest materials. Most of our kit parts are polyester, however, we also work with Kevlar and Carbon Fiber. We allow our parts to remain in the molds longer to dry, this stops the part from moving or warping due to being green. All of our body parts will be built with our racing back ground in mind, weight, strength and aerodynamics, our parts work, they are not just for looks.

PRODUCT PICTURES:

 

   

  Have a photo of one of these products installed in a Dakota or Durango?  Send it in!

MODEL AVAILABILITY / PART NUMBERS:
1997-2004 Dakota or 1998-2003 Durango Hood Scoop

INSTALLATION INSTRUCTIONS:
You should have a body shop install this product.  Some sanding, prepping, painting, then mounting will be required.
 


US BODY SOURCE
http://www.carhoods.com

9009 South East County Road 325
Hampton, FL 32044
customerservice@carhoods.com

PRODUCT INFORMATION:
Insulated air space between layers, Cormat reinforced surface, with smooth gelcoating inside and out.  High-Tech design inner liner fully supports the outer skin, providing a show worthy inner structure which is smooth, rigid, and ready for prep & paint. The Cormat reinforced surface is both strong and straight. Steel anchors allow for use with both OEM hinge & latch. Side  90 edges are left long, scoops & baffles come closed & require opening to make the hood functional. Lighter tension springs may be required.

PRODUCT PICTURES:

RAM AIR HOOD:

   

   

   

COWL HOOD:

 

  Have a photo of one of these products installed in a Dakota or Durango?  Send it in!

MODEL AVAILABILITY / PART NUMBERS:
Part #TDKH-97SD - 1997-2004 Dakota or 1998-2003 Durango "Dominator" Cowl Hood
Part #TDKH-98 - 1997-2004 Dakota or 1998-2003 Durango "Ram Air II" WS6-Style Hood

INSTALLATION INSTRUCTIONS:
You should have a body shop install this product.  Some sanding, prepping, painting, then mounting will be required.  Expect to pay anywhere from $250-400 for these services.
 


CERVINI'S AUTO DESIGNS
http://www.cervinis.com

3656 N. Mill Rd.
Vineland, NJ 08360, USA
(800) 488-6057
(856) 691-1744
sales@cervinis.com

PRODUCT INFORMATION:
Fiberglass hoods for 1997-2004 Dodge Dakotas and Durangos.  Two styles are available.  See pictures for details.

PRODUCT PICTURES:

SINGLE SCOOP HOOD:

TWIN SCOOP HOOD:

  Have a photo of one of these products installed in a Dakota or Durango?  Send it in!

MODEL AVAILABILITY / PART NUMBERS:
Hoods for 1997-2004 Dakota or 1998-2003 Durango:
Part #138 - Ram Air Hood
Part #137 - "SS" Hood

INSTALLATION INSTRUCTIONS:
You should have a body shop install this product.  Some sanding, prepping, painting, then mounting will be required.  Expect to pay anywhere from $250-400 for these services.
 


EAST COAST CUSTOMS
http://www.eastcoastcustoms.com

Maryville, TN
(865) 983-9091

PRODUCT INFORMATION:
Single-Scoop SS-Style Ram Air Hood for 1997-2004 Dakota/Durango.

PRODUCT PICTURES:

  Have a photo of one of these products installed in a Dakota or Durango?  Send it in!

MODEL AVAILABILITY / PART NUMBERS:
Part #RA300 - Ram Air Hood for 1997-2004 Dakota or 1998-2003 Durango: 

INSTALLATION INSTRUCTIONS:
You should have a body shop install this product.  Some sanding, prepping, painting, then mounting will be required.  Expect to pay anywhere from $250-400 for these services.


ELITE CUSTOMS
http://www.elitecustoms.com -OUT OF BUSINESS

(618) 877-2664
info@elitecustoms.com

PRODUCT INFORMATION:
GTS Hood:
  Engineered for style and performance with over one year in research and prototyping. More then 4 outside companies have helped in this endeavor including Speedtweaks, World Wide Performance Parts, Flometrics Engineering, and Dakota USA. We also owe a debt of gratitude to Illinois College's Physics department and Dr. Chamberlain for his assistance in the project.  The Ram-Air hood has been engineered with a completely enclosed, and isolated, Cold-Air/Ram-Air system and includes a separate heat extraction vent on the rear cowl. The scoop has been designed to match the optimum aerodynamic entry point. Fluid Dynamics testing and flow data are being completed now.  This hood has been designed by Premier Automotive and has its design based on solid physic principals and proven design. It is made of high quality Fiberglass with Steel reinforcements, and is a perfect fit with a fully finished underside as well. A real show-stopper. This is not a copy, redesign, or resell of someone else's hood...it's been designed from the ground up!  The classic Scoop design is based on the NACA hood scoop used on spacecraft, aircraft, high-end race cars such as Ferrari's and a close relative of the hood scoop used on the Dodge Viper. This design gains maximum air flow while almost eliminating drag. It is set in the high pressure zone of the truck to get the most possible airflow.

Cowl Hood:  Completely engineered to fit the 97-04' Dakota and 1998-2003 Durango. This hand laid carbon fiber 2" cowl hood is built to the highest quality standards and guaranteed to fit perfectly. Available in a cold air version or upgrade to the fully enclosed and functional induction system. This is expected to be the lightest hood on the market for the Dakotas and Durangos weighing in around 24lbs. Shipped fright collect via Fedex Freight.

PRODUCT PICTURES:

GTS HOOD:

   

CARBON FIBER COWL HOOD:
 

  Have a photo of one of these products installed in a Dakota or Durango?  Send it in!

MODEL AVAILABILITY / PART NUMBERS:
GTS Hood
Carbon Fiber Cowl Hood

INSTALLATION INSTRUCTIONS:
You should have a body shop install this product.  Some sanding, prepping, painting, then mounting will be required.  Expect to pay anywhere from $250-400 for these services.
 


EREBUNI CORP
http://www.erebunicorp.com
158 Roebling St.
Brooklyn, NY 11211
(718) 387-0800
info@erebunicorp.com

PRODUCT INFORMATION:
Racing-Style Carbon Fiber Hood

PRODUCT PICTURES:

  Have a photo of one of these products installed in a Dakota or Durango?  Send it in!

MODEL AVAILABILITY / PART NUMBERS:
Part #021HOODCF - Carbon Fiber Cowl Hood: 1997-2004 Dakota, 1998-2003 Durango

INSTALLATION INSTRUCTIONS:
You should have a body shop install this product.  Some sanding, prepping, painting, then mounting will be required.  Expect to pay anywhere from $250-400 for these services.
 


FIBER PARTS CONCEPTS
244 E. County Line Road
Hatboro, Pa. 19040
(215) 674-8990 - Rob

PRODUCT INFORMATION:
Fiberglass Cowl Hood for Dodge Dakota or Durango.

PRODUCT PICTURES:

 

 

 

  Have a photo of one of these products installed in a Dakota or Durango?  Send it in!

MODEL AVAILABILITY / PART NUMBERS:
Ram Air Hood for 1997-2004 Dakota and 1998-2003 Durango.

INSTALLATION INSTRUCTIONS:
You should have a body shop install this product.  Some sanding, prepping, painting, then mounting will be required.  Expect to pay anywhere from $250-400 for these services.


MOORE PERFORMANCE PRODUCTS
http://www.fiberglass-hoods.com

3612 US 19
Marble, NC 28905
(828) 835-8907
info@fiberglass-hoods.com

PRODUCT INFORMATION:
Our Dodge Dakota / Durango SRT style ram air hoods are constructed using only the best gelcoats and resins, each hood is the result of many hours work and is inspected many times throughout the manufacturing process, these hoods feature a beautifully detailed underside that is every bit as finished as the topside.

PRODUCT PICTURES:

   

   

   

   

 

  Have a photo of one of these products installed in a Dakota or Durango?  Send it in!

MODEL AVAILABILITY / PART NUMBERS:
Hoods for 1997-2004 Dakota or 1998-2003 Durango

INSTALLATION INSTRUCTIONS:
You should have a body shop install this product.  Some sanding, prepping, painting, then mounting will be required.  Expect to pay anywhere from $250-400 for these services.
 


KEYSTONE RESTYLING
http://www.keystonerestyling.com

6821 West Central Ave.
Toledo, Ohio 43617
(888) 575-3453
(419) 539.7120
sales@keystonerestyling.com

PRODUCT INFORMATION:
Fiberglass Ram Air Hoods.

PRODUCT PICTURES:

97-04 TWIN SCOOP HOOD:

97-04 SHAKER HOOD:
 

  Have a photo of one of these products installed in a Dakota or Durango?  Send it in!

MODEL AVAILABILITY / PART NUMBERS:
Hoods for 1997-2004 Dakota or 1998-2003 Durango:
Part #GHD-20147 - Shelby Hood - Functional for 4.7L Engines for 97-04 Dakota, 98-03 Durango
Part #GHD-20159 - Shelby Hood - Functional for 5.9L Engines for 97-04 Dakota, 98-03 Durango
Part #GHD-20259 - Ram Air Hood - Functional for 5.9L Engines for 97-04 Dakota, 98-03 Durango
Part #GHD-202 - Ram Air Hood - Non-Functional Ram Air for 97-04 Dakota, 98-03 Durango
Part #GHD-204 - Shaker Hood for 97-04 Dakota, 98-03 Durango

INSTALLATION INSTRUCTIONS:

You should have a body shop install this product.  Some sanding, prepping, painting, then mounting will be required.  Expect to pay anywhere from $250-400 for these services.
 


PRO FINISH - PRO GLASS
http://www.profinish-proglass.com

Profinish-Proglass has sold all of their Dodge Dakota hood molds to Keystone Restyling.  See links and pictures above for details.


REFLEXXION AUTOMOTIVE PRODUCTS
http://www.reflexxion.com

2949 Norbrook
Memphis, TN 38116
(901) 332-6263
angii@reflexxion.com

PRODUCT INFORMATION:
All-Steel Cowl Hood for Dodge Dakota or Durango.

PRODUCT PICTURES:

     

     

     

   

  Have a photo of one of these products installed in a Dakota or Durango?  Send it in!

MODEL AVAILABILITY / PART NUMBERS:
Part #701840 - Cowl Hood for 1997-2004 Dakota or 1998-2003 Durango

INSTALLATION INSTRUCTIONS:
You should have a body shop install this product.  Some sanding, prepping, painting, then mounting will be required.  Expect to pay anywhere from $250-400 for these services.


STINGER FIBERGLASS DESIGN
http://www.stingerfiberglass.com

1525 Armstrong Dr.
Titusville, FL
(321) 268-1118
rick@stingerfiberglass.com

PRODUCT INFORMATION:
Stinger Fiberglass products are hand laminated and jig fitted to insure the quality that owners demand and expect. The Stinger Fiberglass Designs are based on the old style of the R/T Superbee and Roadrunner. The design is only found here at Stinger Fiberglass Designs.

These Stinger Fiberglass Hoods will make your truck or car stand out cosmetically and structurally above the rest.

PRODUCT PICTURES:

 

  Have a photo of one of these products installed in a Dakota or Durango?  Send it in!

MODEL AVAILABILITY / PART NUMBERS:
1997-2004 Dakota or 1998-2003 Durango Ram Air Hood

INSTALLATION INSTRUCTIONS:
You should have a body shop install this product.  Some sanding, prepping, painting, then mounting will be required.  Expect to pay anywhere from $250-400 for these services.
 


SUNCOAST CREATIONS
http://www.suncoastcreations.com

3112 29th Ave E
Bradenton, FL 34208
(888) 754-8900
(941) 755-7739
info@suncoastcreations.com

PRODUCT INFORMATION:
Functional hood kits come with the hood, K+N filter, air box, hoses, clamps, hood grilles, Ram Air decals and all necessary components.  These systems add approx. 15-20 hp. 

Hood only orders come with the hood, hood scoop grilles, hood struts, and Ram Air decals.  Air box kits can be ordered at any time in the future for $100.00. 

All Suncoast Creations hoods come with a 90-day limited manufacturing warranty. Also all hoods are fiberglass and come in a gray gelcoat ready to be prepped, primed and painted. 

PRODUCT PICTURES:

 

  Have a photo of one of these products installed in a Dakota or Durango?  Send it in!

MODEL AVAILABILITY / PART NUMBERS:
1997-2004 Dakota or 1998-2003 Durango Ram Air Hood

INSTALLATION INSTRUCTIONS:
You should have a body shop install this product.  Some sanding, prepping, painting, then mounting will be required.  Expect to pay anywhere from $250-400 for these services.

 


2005+ DAKOTA HOODS


US BODY SOURCE
http://www.carhoods.com

9009 South East County Road 325
Hampton, FL 32044
customerservice@carhoods.com

PRODUCT INFORMATION:
Insulated air space between layers, Cormat reinforced surface, with smooth gelcoating inside and out.  High-Tech design inner liner fully supports the outer skin, providing a show worthy inner structure which is smooth, rigid, and ready for prep & paint. The Cormat reinforced surface is both strong and straight. Steel anchors allow for use with both OEM hinge & latch. Side  90 edges are left long, scoops & baffles come closed & require opening to make the hood functional. Lighter tension springs may be required.

PRODUCT PICTURES:

  Have a photo of one of these products installed in a Dakota or Durango?  Send it in!

MODEL AVAILABILITY / PART NUMBERS:
Part #TDKH-05RA - 2005+ Dodge Dakota Ram Air Hood
Part #TDKH-056P - 2005+ Dodge Dakota 6-Pack Hood

INSTALLATION INSTRUCTIONS:
You should have a body shop install this product.  Some sanding, prepping, painting, then mounting will be required.  Expect to pay anywhere from $250-400 for these services.
 


KEYSTONE RESTYLING
http://www.keystonerestyling.com

6821 West Central Ave.
Toledo, Ohio 43617
(888) 575-3453
(419) 539.7120
sales@keystonerestyling.com

PRODUCT INFORMATION:
Fiberglass Ram Air Hoods.

PRODUCT PICTURES:

  Have a photo of one of these products installed in a Dakota or Durango?  Send it in!

MODEL AVAILABILITY / PART NUMBERS:
Part #GHD-206 - Shaker Hood for 05+ Dakota

INSTALLATION INSTRUCTIONS:
You should have a body shop install this product.  Some sanding, prepping, painting, then mounting will be required.  Expect to pay anywhere from $250-400 for these services.
 


RK SPORT
http://www.rksport.com
26900 Jefferson Ave.
Murrieta, California 92562
(951) 894-7883

PRODUCT INFORMATION:
Following the lines of the OEM hood, our engineers designed the T/A Hood. The T/A Hood is functional bringing fresh, cool air directly into the inlet for increased airflow and performance. The T/A Hood is crafted from hi-temp, hand laid fiberglass for exceptional strength and durability. Installation is straightforward using the Dakota's stock hardware.

PRODUCT PICTURES:

 

  Have a photo of one of these products installed in a Dakota or Durango?  Send it in!

MODEL AVAILABILITY / PART NUMBERS:
2005+ Dakota

INSTALLATION INSTRUCTIONS:
You should have a body shop install this product.  Some sanding, prepping, painting, then mounting will be required.  Expect to pay anywhere from $250-400 for these services.
 


2004+ DURANGO HOODS


US BODY SOURCE
http://www.carhoods.com

9009 South East County Road 325
Hampton, FL 32044
customerservice@carhoods.com

PRODUCT INFORMATION:
Insulated air space between layers, Cormat reinforced surface, with smooth gelcoating inside and out.  High-Tech design inner liner fully supports the outer skin, providing a show worthy inner structure which is smooth, rigid, and ready for prep & paint. The Cormat reinforced surface is both strong and straight. Steel anchors allow for use with both OEM hinge & latch. Side  90 edges are left long, scoops & baffles come closed & require opening to make the hood functional. Lighter tension springs may be required.

PRODUCT PICTURES:

  Have a photo of one of these products installed in a Dakota or Durango?  Send it in!

MODEL AVAILABILITY / PART NUMBERS:
Part #TDUH-04RA - 2004+ Durango Ram Air Hood

INSTALLATION INSTRUCTIONS:
You should have a body shop install this product.  Some sanding, prepping, painting, then mounting will be required.  Expect to pay anywhere from $250-400 for these services.
 


KEYSTONE RESTYLING
http://www.keystonerestyling.com

6821 West Central Ave.
Toledo, Ohio 43617
(888) 575-3453
(419) 539.7120
sales@keystonerestyling.com

PRODUCT INFORMATION:
Fiberglass Ram Air Hoods.

PRODUCT PICTURES:
   

  Have a photo of one of these products installed in a Dakota or Durango?  Send it in!

MODEL AVAILABILITY / PART NUMBERS:
Part #GHD-205 - Twin-Duct Hood for 04+ Durango

INSTALLATION INSTRUCTIONS:
You should have a body shop install this product.  Some sanding, prepping, painting, then mounting will be required.  Expect to pay anywhere from $250-400 for these services.
 


Privacy Policy