www.dakota-durango.com

PRODUCT: HEADS

PRODUCT LISTINGS

Disclaimer

EDELBROCK
MOPAR PERFORMANCE

HEAD PORTING/POLISHING:
HUGHES ENGINES
KAMMER RACING
KRC PERFORMANCE
SHADY DELL SPEED SHOP
SOCAL DAKOTA
SOUTHEAST PERFORMANCE
THE FASTMAN

The information contained within this website has been gathered from the internet as an archive for Dodge Dakota and Durango owners, and is for informational purposes only. The owners of this website are not directly affiliated with any of these companies, and do not guarantee or warranty any of the products listed on this page. The opinions expressed on this page are respective of their individual sources, and are not meant to be represented as unarguable fact. Research your purchases carefully and contact the companies listed on this page if you have any questions or comments. This website is not responsible for any parts that are not compatible, don't work, or damage your vehicle. However, if you do find any information on this site that is ambiguous or incorrect please contact the website staff immediately.

THANK YOU to everyone who has contributed information to this list!

NOTE: PRODUCTS ARE LISTED IN ALPHABETICAL ORDER OF MANUFACTURER WEBSITE URL

DO YOU KNOW A PRODUCT THAT IS NOT LISTED ON THIS SITE?
SUBMIT THE INFO TO WEBMASTER@DAKOTA-DURANGO.COM

MANUFACTURER: Edelbrock
WEBSITE: http://www.edelbrock.com
CONTACT INFORMATION:
(800) 416-8628
edelbrock@edelbrock.com

PRODUCT INFORMATION:
Performer RPM Chrysler Magnum Heads
Designed for 1992 & later 5.2L (318 c.i.d.) and 1993 & later 5.9L (360 c.i.d.) Chrysler Magnum V8s, the Performer RPM Chrysler Magnum heads give substantial performance improvements for street/strip and off-road performance use. They offer an easy bolt-on upgrade for these modern engines with substantial out-of-the-box performance gains. Stock Magnum intake and exhaust flange and port locations make this an ideal choice for use with stock equipment. These heads feature 176cc intake ports and 75cc exhaust ports with 58cc combustion chambers for a slight increase in compression over the factory heads. 2.02" intake and 1.60" exhaust valves with 11/32" stems offer more flow than stock and they accept adjustable aftermarket rocker arms. Sold individually and requires hardened push rods.

PRODUCT PICTURES:
CLICK ON A THUMBNAIL TO SEE IN FULL RESOLUTION

Photo: Edelbrock Heads

Have a photo of one of these mounted on a Dakota/Durango? Send it in!

MODEL AVAILABILITY / PART NUMBERS:
Replacement Heads for 5.2L 318ci or 5.9L 360ci engines only

INSTALLATION INSTRUCTIONS:
If you don't know how to install this, you need to contact a mechanic.

MANUFACTURER: Mopar Performance
WEBSITE: http://www.mopar.com
CONTACT INFORMATION:
No further contact information available.

PRODUCT INFORMATION:
1.92/1.62 R/T head bare - Mopar Part # P5007140
2.02/1.62 R/T head bare - Mopar Part # P5007141
1.92/1.65 R/T head fully assembled - Mopar Part # P5007145

Head Gasket - Mopar Part # P4349557
Fel-Pro Head Gasket - Part #1008

PRODUCT PICTURES:
CLICK ON A THUMBNAIL TO SEE IN FULL RESOLUTION

Photo: Stock 5.9L heads, R/T performance heads, picture from KRC Performance.

Have a photo of one of these mounted on a Dakota/Durango? Send it in!

MODEL AVAILABILITY / PART NUMBERS:
Replacement Heads for 5.9L 360ci Engine only

INSTALLATION INSTRUCTIONS:
If you don't know how to install this, you need to contact a mechanic.