2002 Graphite CC 408 R/T

[mtlcafan79]

2002 CC R/T. Graphite with 31,990 miles on it. Engine was gone through at 30,320. Has new oil pump, new rings, new bearings, Cometics, oil pan gasket, etc.

Here are the specs for those interested:

Fastman built/PIE refreshed 408
.030" over MP block
Ross 10.3:1 forged pistons
Eagle H beams
Eagle 4" forged crank
224/229 .550/.560 on a 113 cam
2.02 R/T heads ported by Fastman
Chrome powder coated 4bbl M1
Graphite powder coated Mopar valve covers
14x3 K&N
F&B 52x55 TB
24lb/hr injectors
1 3/4" Spintech Headers
2.5" Spintech dual exhaust, cats, 18" Magnaflows
MSD Digital 6
MSD wires
Moroso vacuum can
BeCool custom aluminum radiator with dual fans w/Painless wiring setup
SCT XCal tuner with Performance, Race, and Nitrous tunes
NX Nitrous kit hidden in wiper cowl
NX 2bbl plate
NX Purge
Dual 10lb bottles in a custom bracket
Dual bottle heaters
Single remote bottle opener
QA1's on all four corners
Full Hotchkis
Caltracs
LPW differential cover
4.10's with Detroit Locker
SSBC rear disc conversion
Martin Sane built 46RE/PI 3200 Viper stall ~5k miles on these
Remote tranny filter/oversize cooler
Alan Short driveshaft loop
Reflexxion Cowl hood
SS Billet grille inserts
Clear Corners
SS power mirrors
Handles/Mirrors painted to match
Power windows/locks
Fiberglass tonneau
BedRug
Roll pan
17" Steel spare with new RSA
18" Billet Specialties Vintec wheels
Nitto NT550 295/45/18 tires
Kenwood receiver with a lifetime Sirius subscription
Carbon door/dash/glove box accents
B&M Hammer floor shifter
Embroidered floor mats
Autometer N2O, fuel pressure, and shift lights in a triple pillar pod
LM-1 Wideband O2
Line Lock
Bogart 15x3 Billet Lites w/ 26x4.5 Hoosiers
AR 15x8 Bajas with 28x9 Hooiser slicks


http://www.sincityrt.com/photos/drtc2006/DSC01762.JPG

http://www.sincityrt.com/photos/drtc2006/DSC01760.JPG

http://www.sincityrt.com/photos/drtc2006/DSC01985.JPG

http://www.sincityrt.com/photos/drtc2006g/IMG_5086.JPG

http://www.sincityrt.com/photos/drtc2006a/Dakota%20RT%20National%20Meet%2006%20047.jpg

http://www.sincityrt.com/photos/drtc2006/DSC02122.JPG

http://www.sincityrt.com/photos/drtc2006g/IMG_5397.JPG

http://home.comcast.net/~seanmca79/rt_int1.jpg

http://home.comcast.net/~seanmca79/rt_int2.jpg

http://home.comcast.net/~seanmca79/rt_int3.jpg

http://home.comcast.net/~seanmca79/rt_int4.jpg

http://home.comcast.net/~seanmca79/408_dyno.jpg

Truck has gone 12.55@107 n/a and 11.6@118 on a 100 shot.

I have a set of rtmods.com port plates NIB, factory corners, and a 99 washer bottle setup to go with it too that aren't installed.

Asking $11,500 obo. Feel free to PM me with any questions.

[Sunkist_R/T]

Nice truck....Best of luck to ya on the sale

[TurboBlew]

Is this truck 4 wheel abs?

[DEEZNUTTS]

that is seriously a beautiful truck my brother...is the truck from nc?i was thinking you were out in ca...

[moore_716]

WOW. beautiful truck. Good Luck with the sale.

[mtlcafan79]

Yep. This was originally Earl Elsworth's truck. Joe Burke had it for a couple months of 07 and then I picked it up.

I'll have to check on the ABS. I never looked that up.

[Twisted_DaK]

dang thats a sweet looking truck..:jawdrop: BUMP!!

[Jackedak03]

Holy shit that truck is close to perfect (I'd go boosted rather than Nitrous) but that thing is beautiful!!! Best of luck on the sale!

[PSSTRT]

Man, I keep finding myself comming back to look at this thing. Nice Truck!!!

Free Bump!:mullet:

[dak-rt-2a-XR]

did turboblew pick this up?

[mtlcafan79]

No. I'm assuming he bought the one in his sig.

[dak-rt-2a-XR]

i only see the one in his avatar and its small...thought he may have got this one...

free bump anyways...

[99R/T360]

pm'd

[Bad_banana]

relax victor!

[Dakudaman]

Vic can't make up his mind what he wants or want's to do! LOL!

[dakoturrr]

How long ago was this truck at PIE?? Looking at it in the pics is giving me a flashback of seeing it out front of there sometime last spring.

[mtlcafan79]

It was there from April til August.

[mtlcafan79]

$14,500 firm for now.

[Bad_banana]

How many times have you changed your mind on heads/cam vic :P

He is going 408 now! He bought my old 360 from alan (grapejuice1998).

[mtlcafan79]

I will include a rare Elite Customs Carbon Fibre hood for the lucky buyer. This hood has been recleared and never installed on a truck since then. It includes a cold air induction lid, K&N 14x3 filter, and x-stream lid. The hood weights 25# and is one of approxamately 10 ever made. If anyone is interested in just the hood, PM me. I need to buy new batteries for my camera and I will try to get some pics up of the hood and the interior of the truck.

[mtlcafan79]

Hood is sold.

[Bad_banana]

any pics of it just for shits and giggles?

[mtlcafan79]

You can see one in the parts section of the site under Elite Customs.

[Derrick1227]

dang i wish I would of noticed the hood was for sale oh well free bump for an awesome truck

[Snipedak02]

You can see one in the parts section of the site under Elite Customs.

hey this is a little of topic, but were did you find the nx 2bbl plate?

free :bump:

[mtlcafan79]

You can order them direct from Nitrous Express. It's on their website even.

"Q. My dodge Dakota pickup has a 360 engine with throttle body style injectors. No one else I have contacted makes a nitrous kit for this combination, does NX?

A. The Dakota is unique but NX makes two systems for this set-up. PN 20218 uses two Shark nozzles under the air cleaner mounted in a plastic adaptor ring. This system is adjustable 75-100-150HP. Another popular option is the PN 20921dodgemagnumplate. Despite the odd part number it is a great plate system that mounts under the throttle body and is adjustable 50-100-150HP with optional setting of 200-250-300HP."

[Snipedak02]

You can order them direct from Nitrous Express. It's on their website even.

"Q. My dodge Dakota pickup has a 360 engine with throttle body style injectors. No one else I have contacted makes a nitrous kit for this combination, does NX?

A. The Dakota is unique but NX makes two systems for this set-up. PN 20218 uses two Shark nozzles under the air cleaner mounted in a plastic adaptor ring. This system is adjustable 75-100-150HP. Another popular option is the PN 20921dodgemagnumplate. Despite the odd part number it is a great plate system that mounts under the throttle body and is adjustable 50-100-150HP with optional setting of 200-250-300HP."

sweet man thanks alot i was thinking about getting a plate when i hook up the nx!! btw how much does it sell for?

[dak-rt-2a-XR]

sweet man thanks alot i was thinking about getting a plate when i hook up the nx!! btw how much does it sell for?
$250-$300 IIRC

[Snipedak02]

do you have a pic of this plate, i looked on nx site & summit/jegs could not find it? is it special order?

[TurboBlew]

I dont think its a stocking part. I looked for well over a year. NX wanted $399 at the time.
http://img.photobucket.com/albums/v486/Frankfriendly/DAKOTAPICS/P7230537.jpg

[dak-rt-2a-XR]

do you have a pic of this plate, i looked on nx site & summit/jegs could not find it? is it special order?
you have to get it from NX direct or pick it up used

[Snipedak02]

thanks for the pic! thats pretty pricey, ill prob just stay with the shark nozzle for now? on a side note could the shark nozzle be mounted in the plug below the tb on the m1?

[TurboBlew]

thanks for the pic! thats pretty pricey, ill prob just stay with the shark nozzle for now? on a side note could the shark nozzle be mounted in the plug below the tb on the m1?

I wouldnt risk having "distribution" problems.

Wilson Manifolds can modify your m1 to have those spray bars in them.

If you have a 4bbl... the bolt pattern is 4150, standard holley carb mount.

[Snipedak02]

no i have the 2bbl, i dont really see any distribution problems only difference is theres no throttle blades to cut off the nx if need be? unless i modify the airhat for the shark nozzle? hmm

[TurboBlew]

huh? THe solenoids cut the flow not the throttle blades

[Snipedak02]

huh? THe solenoids cut the flow not the throttle blades

tru!! im just saying worst case i roll the truck over & cant kill the switch, when m foot comes off the throttle the blades close & cuts the flow of the NX

[TurboBlew]

tru!! im just saying worst case i roll the truck over & cant kill the switch, when m foot comes off the throttle the blades close & cuts the flow of the NX

lol... your clarification only confuses me more.

Im positive ALL vehicles made after 1990 have cutoff switches from a rollover.

[Snipedak02]

haha!

[slowr/t]

Isn't that a little low on power for a 408?

[mtlcafan79]

I dunno, goes faster n/a than my heads/cam 360 goes on a 100 shot. I could make a lot more power, but I doubt I could get it to pass MD OBDII emissions.

[slowr/t]

Red Na lines Blue Nitrous correct? Just curious.

[mtlcafan79]

Yes. I know Chad's truck makes as much on the motor as I do on the spray. He's got a bit more cam, head work, and exhaust than I do. I just don't have the $$$ to throw at it right now to upgrade that stuff.

[ALipper]

those rims are mint

[mtlcafan79]

Anyone interested? I owe $11,XXX on the loan for the truck. It just sits in my driveway for weeks at a time.

[JMSoc02]

Anyone interested? I owe $11,XXX on the loan for the truck. It just sits in my driveway for weeks at a time.

PM Sent

[huskerrt79]

Come on SRT-10 SELLL!!!! I'm trying man!! LOL

[Mopar4Life]

Still want to trade the wheels/tires for R/Ts?

[mtlcafan79]

Wheels stay with the truck for now.

[mtlcafan79]

Sale pending...

[mtlcafan79]

Back up for sale. $12,250 firm. I will have it at Carlisle if anyone wants to see it in person.

[mtlcafan79]

bump...

[DrewzR/T]

Damn thats a steal!!! Dude If I wasn't gettin in a chally I'd be all over it!

[dakotapimpc]

wtf man everyone local is selling there shit now that mines finally almost ready lol jk good luck w the sale let me know if u want some rt wheels ill swing by and even swap them off for you lol

[Jackedak03]

Will it hold a 7 1/2' Fisher Plow? I know sure as shit it'll push it!


J/K Best of luck with the sale.

[mtlcafan79]

bump...

[2dakotas]

Pm'd

[mtlcafan79]

As now seen on Craigslist bump.

[mtlcafan79]

Now asking $12,000.

[Mopar4Life]

So it's just a full hotchkis drop and 295/45/18s? That's a nice stance.

[mtlcafan79]

The front coils are cut Hotchkis coils. How much though I'm not sure.

[mtlcafan79]

http://home.comcast.net/~seanmca79/rt_int1.jpg

http://home.comcast.net/~seanmca79/rt_int2.jpg

http://home.comcast.net/~seanmca79/rt_int3.jpg

http://home.comcast.net/~seanmca79/rt_int4.jpg

[mtlcafan79]

$12,000 obo.

[mtlcafan79]

$11.750 obo. I was gonna wait til August, but this needs to go. Autotrader is next.

[mtlcafan79]

New month, new price. $11,500 obo.

[Bad_banana]

Only if you were a bank, and or took clunker trade in, you'd have a good 6k from me right now.

[mtlcafan79]

Weekend bump...

[mtlcafan79]

bump

[mtlcafan79]

Sale pending...

[2k1AmberR/T]

Sale pending...

Ruh Roh...in Nova?

[mtlcafan79]

Dulles.

[Bad_banana]

good luck.

[mtlcafan79]

Sold!

[Bad_banana]

bout time, who took it?

[mtlcafan79]

local guy off craigslist

[Bad_banana]

so is he local to the forums or community?
Will he be guided to the forums?
(pulling teeth at the dentist).

[sick408dakr/t]

Wow, I offered 13.5K cash a while ago. Never got back to me. Oh well, I got a Challenger instead. Congrats on the sell. :)

[chadsrt]

so is he local to the forums or community?
Will he be guided to the forums?
(pulling teeth at the dentist).

Sitting in my garage now. :drive: Sorta, I've been around for a while but just put things with my 99 on the back burner. :drive: