PDA

View Full Version : Motor Mounts

96BlkDak
10-19-2008, 04:46 PM
Do motor mounts and I guess transmission mounts need to be fabricated or are there some already for sale or that work?

I know Im going to ask some dumb sounding questions but y'all have proven the simpler the question the more diverse the answers that are given (unless there is only one answer).
cegpcola
10-20-2008, 03:03 AM
There are none available that will fit the Dak or Dur at this time. There are some mounts for some of the older cars, but not for the trucks. They all have to be fabricated.
TurboBlew
10-20-2008, 03:20 AM
just use a torque arm. easy to fab! They even make them in uber expensive billet!!
ROCKAUTO
10-21-2008, 11:07 PM
Hi,

RockAuto.com has the mounts you are looking for. Click on the links below.

Motor:
http://www.rockauto.com/catalog/raframecatalog.php?carcode=1087668&parttype=5552

Trans:
http://www.rockauto.com/catalog/raframecatalog.php?carcode=1087668&parttype=8756
69rrbruce
10-22-2008, 04:34 AM
Hi,

RockAuto.com has the mounts you are looking for. Click on the links below.

Motor:
http://www.rockauto.com/catalog/raframecatalog.php?carcode=1087668&parttype=5552

Trans:
http://www.rockauto.com/catalog/raframecatalog.php?carcode=1087668&parttype=8756

These are stock 1996 Dakota mounts not for a Hemi in a Dakota????
69rrbruce
10-22-2008, 04:41 AM
See my 98 Dakota Hemi Swap thread http://www.dakota-durango.com/forum/showthread.php?t=56958 for how I modified manufactured motor mounts to my frame. I've seen some Hemi motor mounts by "Tinman" on EBAY that look pretty sweet and could be easily adapted to any frame using some steel plate tabs. http://cgi.ebay.com/ebaymotors/TIN-MAN-Motor-Mounts-426-Hemi-Hemi-Crate-Engines_W0QQitemZ180298368914QQcmdZViewItem?hash=i tem180298368914&_trkparms=72%3A727%7C39%3A1%7C65%3A12%7C240%3A1318&_trksid=p4506.c0.m245 Check it out.
ROCKAUTO
10-22-2008, 10:08 PM
These are stock 1996 Dakota mounts not for a Hemi in a Dakota????

Hi,

I'm sorry! The mounts mentioned are for the stock engine.
HemiDak
10-23-2008, 04:29 AM
Hi,

I'm sorry! The mounts mentioned are for the stock engine.

No, because this is in the Hemi forum. ;)

Also, why would someone need to modify stock motor mounts other then doing an engine swap. :huh:
96BlkDak
11-05-2008, 03:44 AM
anyone good with a welder want to make me a set :jester: