need to add HP

[69cass69]

hey how you all doing, im new to the site! i have a 99 RT club cab! i have custom flow master exhust and a K&N intake! but i want to go faster and i was jsut wondering if you all had any ideas of what i could do without buying a supercharger or nitrous!?! please let me know if you all come up with anything ?


thank cass

[GOON'S D]

Throttle Body, 180 T-stat, plugs wires and rotor, m-1 manifold, headers

[Spider]

Check out www.gsmotorsports.com they have some great power adders on there, especially the headers and exhaust wich is probably the best to start with.

[DirtyR/T]

Throttle Body, 180 T-stat, plugs wires and rotor, m-1 manifold, headers


yeah that will get you started, might wanna pick up a Mopar PCM too. Then do R/T heads 1.6 RR and a cam and other goodies.

[69cass69]

whats a mopar pcm???

[GOON'S D]

A performance computer manufactured by MOPAR for our Durango's and Dakota's

[rockadaous]

gotta group buy going on for $306 which includes flashed with your VIN#

[Sneezer]

hey how you all doing, im new to the site! i have a 99 RT club cab! i have custom flow master exhust and a K&N intake! but i want to go faster and i was jsut wondering if you all had any ideas of what i could do without buying a supercharger or nitrous!?! please let me know if you all come up with anything ?


thank cass

Many things you can do. Set a budget, that will really determine what your options are. It is more expensive to mod a Mopar than anything else. Just not as big an aftermarket as the Ford/Chevy guys enjoy. Thus the popularity of the Mustang.

M1 intake - $450 shipped max including install kit and gaskets. Good hp bump at the expense of some low end. I like mine.

52mm TB - $220-$450, depending on reworked stocker or billet aluminum
Mopar PCM - $250-300
Rockers - 1.6 or 1.7 ratio, depending on cam - $250-450
Cam - $250-400
Underdrive pulleys - $45-150
Electric fan conversion - $200-300
Transgo shift kit - $125
RT heads - $1200-1400 for a complete set with new hardware
MSD ignition - $125-200
180 T-stat
TPS adjustment
IAT relocation
Autolite or NGK plugs
Headers - $250-1000 depending on what kind you want to get
Carsound high flow cat - $50-100

That should get you started on bolt ons. Have fun.

[69cass69]

if i wanted to put a shifter on the floor, how would i go about doing that? is it lot's of labour and hard to do??