PDA

View Full Version : over spray


Slow97dakota
10-03-2006, 07:13 AM
i send my truck to the body shop to have the fix the driver side bed side and i get the truck back like a month ago and its got over spray all over the thing. how can i get this off. clay bar? heavy compound? i havent tried anything yet, and they wont do anything.

AmberFireDaK
10-03-2006, 07:17 AM
What do you mean they won't do anything?? WTF? They f*ck up your paint and then refuse to fix their own mistake?

kjun
10-03-2006, 04:30 PM
What a load of crap. How an they not fix their screw up.

Regarding the overspray, I've had luck with baking soda and water. Removes it without messing up the original paint. And doesn't take a lot of elbow power. But again, I've only used it for small areas.

Ben
10-03-2006, 04:41 PM
The clay bar will work, but make sure you use lube. What i mean by lube is quick detailer, don't use it dry. a light rubbing compound may work as well.

ucimaplaya2
10-03-2006, 05:55 PM
get yourself a clay bar kit and never look back.

Drivernumber22
10-03-2006, 09:18 PM
take the clay bar and shuv it up there ass with no lube

Bad_banana
10-03-2006, 09:19 PM
vinager water will work to help get all the heavy parts off, then go over it with a clay bar, then add 2 coats of zaino z2 with the accelrator and you will have the best looking paint ever. :bow:

miserytom
04-14-2007, 05:53 PM
id say its time to call your lawyer lol

01SilverDak01
04-14-2007, 07:01 PM
A couple of hours with a Clay Bar and a few bottles of Quick Detailer, or a Bottle of Final inspection will take care of it.......

Then a Good coat of Mothers California Gold or similar wax will help...

Zaino is good, but it's a Bear to work with!