Fogging Headlights and Clear corners...

[98KotaRT]

I have a Dakota and have the diamond cut headlights and clear corners. They keep fogging up and getting water in them. they are installed correctly and i dont know what to try. Im pretty sure the seal isnt cracked anywhere because i filled the light with water to see if it was. The water does come out theheat hose on the top of the light or the hole to let out the pressure in the light. Does anyone know how to fix this or do i have to keeeeeep taking out the light and drying it out. :fight:

[CYCLONE_06]

Yes sir. I have a plan for you. First thing you gotta do is remove all corners and lights. Then take some clear silicone (you can get it at napa or wal mart), and seal around the outer seals where the lense meets the black plastic. Even though the seals you have are probably ok, do this anyway. After you do that, drill a small hole on the underside of each bulb socket in your corners, but drill them up on an angle underneath so no water can get in when you wash your truck. Do the same for your headlights. Let the silicone dry really well, and you shouldnt have anymore trouble, because the silicone keeps the water out and the drilled holes let air in to keep them from condensating.

Hope that helps.

~CYCLONE_06