3.7L guys need to shout out

[ROGAN]

I sent this email to superchips :jester:

From: "Technical Account" <tech@superchips.com>
[Add to Address Book]
To: <alwrogan@comcast.net>
Subject: RE: Superchips.com Customer Inquiry
Date: Wednesday, April 19, 2006 7:13:38 AM [View Source]



That definitely wont get a product made for that model. Try getting more interested. One person wont cut it.





Customer service department

888-227-2447




--------------------------------------------------------------------------------

From: alwrogan@comcast.net [mailto:alwrogan@comcast.net]
Sent: Tuesday, April 18, 2006 10:40 PM
To: Technical Account
Subject: Superchips.com Customer Inquiry



From: al rogan

whos ass do i need to whip for the dodge/jeep 3.7L engine to a super chip

[darwinbohnke]

i have emailed them too! we should start a thread asking who would want a superchips programer for their 3.7l if they makde one and then email them a copy of the thread and you could also post a simular thread in a jeep forum.


Subject: RE: Superchips.com Customer Inquiry
Date: Tue, 4 Apr 2006 10:34:05 -0400
From: "Technical Account" <tech@superchips.com> Add to Address BookAdd to Address Book Add Mobile Alert
To: darwinbohnke@yahoo.com

There is not enough demand for a tuner that will work with that motor at this time. Keep checking the web page periodically, if one will be made it will be listed there.

Customer service department

888-227-2447
--------------------------------------------------

From: darwinbohnke@yahoo.com [mailto:darwinbohnke@yahoo.com]
Sent: Monday, April 03, 2006 7:23 PM
To: Technical Account
Subject: Superchips.com Customer Inquiry

From: Darwin Bohnke

i have a 04 Dode Dakota with the 3.7L V6 and you dont have a programer for the 3.7L V6 on your site and i was woundering if you were going to produce a programer and if so how soon.

thank you,
Darwin Bohnke

[ROGAN]

could someone get steve to set up something to collect a list of 3.7 owners wanting the superchip

[UsRanger11B1V]

I also wrote Co. Same response.

[ROGAN]

well i guess we can forget about a superchip

From: "Technical Account" <tech@superchips.com>
[Add to Address Book]
To: <alwrogan@comcast.net>
Subject: RE: Superchips.com Customer Inquiry
Date: Thursday, April 20, 2006 9:55:36 AM [View Source]



I have been told 15,000.





Customer service department

888-227-2447




--------------------------------------------------------------------------------

From: alwrogan@comcast.net [mailto:alwrogan@comcast.net]
Sent: Wednesday, April 19, 2006 11:56 PM
To: Technical Account
Subject: RE: Superchips.com Customer Inquiry



how many advance orders would you need, we are starting a list at our website and plan on contacting some other websites. but we dont know the feasiblity of doing this work unless there is some goal we need to acheive. an approximation will do.

[MusicCityDak]

Al, I didn't know you had a 3.7 in your Dak.

[ROGAN]

yes i do, but when you saw my truck it was totally debadged but you can still tell by how high the bed sits above the wheels. and how is that fiberglass bottum comming you need any advice or help?

[MusicCityDak]

yes i do, but when you saw my truck it was totally debadged but you can still tell by how high the bed sits above the wheels. and how is that fiberglass bottum comming you need any advice or help?

Ran out of hardener, need to go resupply lol, been pretty busy the last couple of free weekends since I got the mold... Hopefully it will be finished up in another weekend or two.

[FASTDAKOTA]

i have a the superchip on my 3.9 V6 gave me tons of problems it cause me engine to stall. I'd rather us hypertech there the best.

[magnm]

b&g performance get your computer flashed for the same money
they can turn up about 10-20 hp out of that 3.7 :mullet:

[00BlkDakSpt]

Forget about superchips, I hear the same story over and over again from them. 15,000? I doubt Dodge made that many models for 04. Future models might be supported, but I read somewhere that they changed the cam profile for a smoother idle. Whether that means they programmed the ECM differently too, I don't know. But if they support 05+ 3.7's it might not work on our 04's. Point is don't hold your breath. You'll get better performance from a B&G or KRC Cam Cal tailored to your mods. :biggthump which can easily crank out more HP than a generic program.

[guehner]

How do we get in touch with eather of these companys? Is there a website?

[00BlkDakSpt]

KRC Performance

http://www.krcperformance.com (321)-635-8866



B&G Chrysler Specialists,Inc

http://www.bgchrysler.com (586) 758-2003

[Dakota Al]

hay guys, I got the same responce from both Hypertech and Superchips. It sucks. I hear so much good stuff about the programmers.

[00BlkDakSpt]

Just get a custom flash. its $$ for most but its better than any other plug in programmer. Anything is going to be custom for us red-headed step children. I got some big cams, race heads (in the machine shop) at KRC right now. Then gotta get a custom flash. And a blower a blower coming next year. Can't wait to show all you 3.7 guys what this comb puts down :woot:

[Dakota Al]

00BlkDakSpt, this might be a stupid question but do you have to send in your PCM for the flash or does the charge include a new/refurbed one? I am seriusly looking into a custom flash since no one wants to make a programmer. I hate the idea of shipping mine out. Not only will I not be able to drive my truck, what if I run into a problem? I'll have to get a new PCM at the dealer. Please enlighten me on your experiance if you could. :beer:

[00BlkDakSpt]

I haven't gotten my flashed yet. But its usually a week to get it back. And yes, if you don't have a spare PCM your truck will have that down time. I don't know of much problems with custom flashes. I always here they plug it in and start her up. Give Marty (KRC Performance) or B&G Chrysler a call if you have any questions. Marty if full of info. Pick his brain. :biggthump

[mudkicker78]

your chip can be programmed guys, reprogramming your chip is perfectly fine, find someone who has the softwear