Water Pump Pulley Removal

[littlejoe]

OK, need to remove my fan and clutch assembly (97 3.9), anyone know of the tool # (or the dimension for the studs) for the spanner wrench to hold the waterpump pulley while you remove the fan/clutch assembly? called a few stores no one seems to have it. Thanks, Lj

[Brian22]

leave the serpentine belt on the engine and grab a big wrench and a hammer and put it on the nut inbetween the fan and the water pump and turn it clockwise.. (its a reverse threaded setup)

[Slow97dakota]

if ya got a air chizzel u can just use that. the wrench wouldent work for me but the chizzel did :biggthump