Amsoil Dealer
01-08-2006, 12:39 AM
__________
Helpful Differential Recommendations:
- Flush (drain) as much of the old fluid out.
- Differential fluid capacity depends on ring gear and axle housing size.
- Do not over/under fill differential. This could mean a capacity difference of a quart
or more and may cause overheating problems. (See owner’s manual for proper fill level)
FYI --- AMSOIL gear oils are formulated with friction modifiers for limited slip differential applications. There is no need to add limited slip or additional additives. Should limited slip differential chatter occur, add AMSOIL Slip-Lock™ friction modifier additive.
- After changing the differential fluid, drive the vehicle in 7 or 8 figure eight turns, so the new lubricant can work its way into the axle assembly.
__________
"Synthetics" provide the long-lasting protection, fuel efficiency and dependability needed for top performance, even extreme-pressure conditions, and stays fluid in cold temperatures for easy cold-weather shifting.
__________
Please Consider: AMSOIL SEVERE GEAR™ Synthetic Extreme Pressure (EP) Lubricant 75W-90. Formulated for the severe operating conditions of today’s pick-up trucks, SUVs, heavy equipment and other hard working vehicles.
Performance
AMSOIL SEVERE GEAR™ provides performance beyond that possible with conventional gear oil. These AMSOIL custom products offer superior gear and bearing protection, better friction and heat reduction, increased efficiency and extended service life.
- Superior Film Strength
- Controls Thermal Runaway
- Rust and Corrosion protection
- Reduced Operating Temperatures
- Improved Efficiency
- Longer Oil, Seal, & Equipment Life
- Temperature Extremes
AMSOIL SEVERE GEAR™ EP lubricants excel in HOT and COLD temperature extremes. By design, they resist breakdown from high heat, preventing acids and carbon/varnish formation. Their waxfree construction also improves cold flow properties, improving fuel economy and cold weather shifting.
Applications
AMSOIL SEVERE GEAR™ Synthetic EP Lubricants are excellent for severe applications, such as towing, hauling, steep hill driving, commercial use, plowing, racing, off-road use, rapid acceleration, frequent stop-and-go operation and high ambient temperatures.
Helpful Differential Recommendations:
- Flush (drain) as much of the old fluid out.
- Differential fluid capacity depends on ring gear and axle housing size.
- Do not over/under fill differential. This could mean a capacity difference of a quart
or more and may cause overheating problems. (See owner’s manual for proper fill level)
FYI --- AMSOIL gear oils are formulated with friction modifiers for limited slip differential applications. There is no need to add limited slip or additional additives. Should limited slip differential chatter occur, add AMSOIL Slip-Lock™ friction modifier additive.
- After changing the differential fluid, drive the vehicle in 7 or 8 figure eight turns, so the new lubricant can work its way into the axle assembly.
__________
"Synthetics" provide the long-lasting protection, fuel efficiency and dependability needed for top performance, even extreme-pressure conditions, and stays fluid in cold temperatures for easy cold-weather shifting.
__________
Please Consider: AMSOIL SEVERE GEAR™ Synthetic Extreme Pressure (EP) Lubricant 75W-90. Formulated for the severe operating conditions of today’s pick-up trucks, SUVs, heavy equipment and other hard working vehicles.
Performance
AMSOIL SEVERE GEAR™ provides performance beyond that possible with conventional gear oil. These AMSOIL custom products offer superior gear and bearing protection, better friction and heat reduction, increased efficiency and extended service life.
- Superior Film Strength
- Controls Thermal Runaway
- Rust and Corrosion protection
- Reduced Operating Temperatures
- Improved Efficiency
- Longer Oil, Seal, & Equipment Life
- Temperature Extremes
AMSOIL SEVERE GEAR™ EP lubricants excel in HOT and COLD temperature extremes. By design, they resist breakdown from high heat, preventing acids and carbon/varnish formation. Their waxfree construction also improves cold flow properties, improving fuel economy and cold weather shifting.
Applications
AMSOIL SEVERE GEAR™ Synthetic EP Lubricants are excellent for severe applications, such as towing, hauling, steep hill driving, commercial use, plowing, racing, off-road use, rapid acceleration, frequent stop-and-go operation and high ambient temperatures.