- Another cam queston
- How to wire MSD to 5.2
- radiator cap replacement
- clutch fan dying?
- Help pulling motor
- Throwing 02 Sensor code...
- How is this cam?
- Ford 24LB injectors in a 5.2 and /or 5.9?
- transmission with 3.9 to 5.9 swap
- Motor Mounts and Transmission Mount
- 2000 5.9L major problems, any clues?
- Durango Performance!
- LA cam OK? in Magnum
- spark nock???
- I'm going to do a Cam
- Better Gas Milage?
- Injector Interchange
- 5.2 modifications
- Super Charging a 5.9 Magnum
- Engine Gaskets
- Write to Edelbrock for CARB certification on our heads!!
- engine swap from 1996 3.9 to 1993 5.2
- 408 stroker motor
- Question about the IAC
- tune up time! need your help!
- custom flash might help?
- Superchips programmer
- 14's-14.5's in the quarter
- Any tips for Plenum Gasket replacement?
- Rough idle solution
- Good place to buy engine?
- explain the colors of transmission fluids.
- When do injectors need to be upgraded?
- 426 Stroker
- 5.9 magnum engine swap Grand Wagoneer
- Need Help
- How do I identify what motor I have?
- Motor questions
- FMS Fuel Injector Question
- Intake / Throttle Body issue.
- Check this out!!
- carbed 318
- has it sat too long?
- Traction issues...LOOK
- Elec fan for 95 Ram 5.9
- bucking,stalling,hesitation-5.2
- 4.7 to 5.9?
- 3.9 --> 5.9 = big wiring issue (help me)
- check engine light on my new truck!?!
- Header Gasket?
- COST of buying a stroker
- horrible 5.2 milage
- getting parts together for the 5.9...
- 5.9 stroker?
- need egr block off and part for M1 manifold install.
- help!
- 5.9L 5th cylinder misfire.... what to check now...
- water pump
- 5.9L idle problems, etc.
- Different 360's?
- Need help quick
- 180 degree stat
- TB spacer question
- got my truck back after 4months - stalls out now WTF
- TB Question...
- problem?? HELP!
- Its time to get a cam...
- Stroker Build Questions
- 5.9 runs funny...might be lean?
- ABS and Brake light
- Which torque converter and longtube headers
- belly pan gasket and related stuff
- truck video - check it out!
- Exhaust Help
- Need help chosing parts! (torque converter)
- Firm Shifts
- Anyone running a FAST or aftermarket PCM in 97+ Dakota?
- 5.2 intake ?
- how to: lower idle
- Intake Manifold
- headers & y-pipe
- SRT10 viper motor transplant!
- 5.2/5.9 heads.
- o2 simm, runs rich?
- clogged cats... throwing map sensor off?
- Stroker Kit
- Which Ignition wires??
- Buildig a 318 Stroker
- tapping lifter
- Underdrive Crank Pulley Belt Size
- cam sync question
- clogged flowmaster
- rebuilding a 46rh (518)
- Throttle Body ?
- Engine doesn't start first time
- motor, supercharger- what's the cheapest power
- burning oil!!!
- My plugs after almost 70k!!!
- 318 with cam/heads/headers/bolt-ons vs stock 360
- ???????????
- Valve cover breathers
- pluging the block heater
- Cap and Rotor
- dead spot under load
- Cutting my Cat out. Good?orBad? Sound better?
- just got back from the dyno - chart/vid
- TPS reading
- 1992 Dakota - Blown 408 Build Up
- Quick question about valve covers...
- injector help
- Got a video of my 98 Dak! Check it out let me know wat u think!
- INTAKE manifold...
- Cam + Computer
- Questions
- 07 Charger
- Idle problem...
- dash fubar?
- Whats the best cam for a 318?
- Tranny Help
- Anything special about this TB
- Tranny hmm
- 5.9 with REALLY bad mpg
- no more cat check out the video!
- Spark wire seperators
- 5.9 performance mods
- starting to loose reverse
- KRC 408 Stroker Kit or Piece it Together myself?
- Crankshaft Seal
- Gas Milage report 5.9
- headers
- mopar Commando heads
- Please Read!!
- Truck threw these codes
- Relocating IAT
- new cam
- 1999 5.2 dual in/dual out cat and muffler
- Removing Locked-Down Motor from Tranny?
- Question on M1
- Shifting Problem?
- 5.2 stroker help
- estimated hp?
- Help building my Dakota R/T
- Ever replace a hydraulic lifter/tappet?
- Vibrating/rattling noise coming from engine?
- Well worth the $$$
- New Buildup!
- weird idle issue
- Hs New Catalog
- Heads or no?
- pricing my dakota to sell
- Mopar Performance PCM or Flash stock for 408
- Magnum solid roller style lifters...
- What Tool?
- Overheated 5.9L GenII while towing...
- 5.9 R/T synthetic oil or not?
- 5.2l Rebuild
- What do you all think of this combo
- Accel Injectors?
- 390 Parts List
- Will this work??
- Mopar PCM question
- What do u think on this price for this R/T????
- Need Help Asap Please!!!!!!!
- Engine Fire Details / 318 questions
- 360 flywheel WTF!!!! getting ready to eat another nv3500
- I need some major help!!!
- Older 360
- ok ok...this is kinda hard for me to explain
- R/T heads
- 5.9L GenII Heating problems.
- Where can I find a "turtle" for an M-1?
- Best mid-range intake?
- Fuel Return & Stock Pump
- Quick question!
- Do 5.9's have a knock detector / controller?
- 5.9 cam?
- Having a prob with my 1997 Dak 5.2 5spd!!!
- trans problem
- Timming chain????
- Brodix Heads
- a lil build help
- Calling DDrango
- Misfire Kenne Bell HELP ASAP
- 390 stroker questions...
- p1740 error code on a 2001 durango slt w/5.9L
- 5.9l gas mileage ???
- Where is Camshaft positioning sensor At
- Are these headers any good?
- Race to the 12s
- Doing a 3.9 to 5.9 swap.. questions!
- Any group purchases going on Harland Sharp bolt down rockers?
- Big Question
- headers and plug wires
- Pistons
- 5.9 in a 2.5 Dakota swap??
- electric fans
- Which cylinder is number 5?
- Stock retainers on perf. springs
- No power after 1/2 throttle?????
- Friggin Braces/Brackets
- Retainer question
- 5.9?! DOG! Just my opinion ...
- Upper Radiator Host
- Comprssion
- death flash
- Help!!??!!
- What Else Do I Need
- What size bolt??
- Help!!!! Clogged Catalytic Converter!!!
- Engine compartment smoking..
- 07 Build for speed
- Intake manifold musings
- Dannos lifters shipped..
- Head bolt tourqe specs
- Valve Covers
- Anyone with 5.9 durango? How fast is yours?
- headers
- Belly Pan Gasket Help
- 318 magnum block
- 360 Rebuild
- Edelbrock Aluminum Heads
- intake gasket bad????
- 5.9 stock cam specs
- Worthwhile gain with shorty headers?
- 5.9 wont run
- 5.9 with 5 speed manual
- truck value
- ca engine builder
- Motor Mounts
- Danno lifters.. whos in this time?
- Seafoam
- Hydraulic'd 5.2L???
- Another R/T heads post / HD cast head
- Blown Head Gasket?
- Installing Underdrive Pulley
- cam question
- Is it possible?
- Will any year 5.9 fit my 97?
- Cam Specs for 99 318
- 5.9L Air Intake/Air Hat Question
- Stock cam on a 2000 5.9/360
- Gasket kits
- Cam install
- 5.9 swap question
- Carbed 318?
- 5.9 Intake Removal?
- Danno lifter buy is on!!
- Replacement Main Caps?
- valve question
- Crankshaft Socket